Epoxy Flooring Round Rock TX
Garage floor coatings, polyaspartic patios, and concrete repair for Round Rock homes — from the Teravista master-planned community along I-35 to the older 1990s subdivisions near Dell Diamond.
Austin Epoxy Floor Pros installs garage floor coatings and concrete floor repair across Round Rock — zip code 78664 — from the Dell Diamond / Dell Technologies HQ corridor along I-35 to the eastern Teravista master-planned community and the older 1990s and 2000s subdivisions that fill out the bulk of the city. Round Rock garages cover a wider range of slab conditions than almost any Austin suburb because the housing stock spans three full decades of construction standards. A 1992 Round Rock garage was poured with looser tolerances on vapor barrier and rebar spacing than a 2018 Teravista garage; both deserve a coating system that respects what’s actually under the slab. We diagnose every slab on-site with moisture testing and a crack inventory, then quote a system that fits what you have. Call (737) 325-0985 for a free Round Rock estimate.
Why Round Rock Homes Need a Proper Floor Coating
Round Rock sits squarely on the eastern Houston Black clay belt where the soil expands and contracts dramatically between wet and dry seasons. The 2011 drought and the 2022 dry summer both pulled clay moisture below 18%, and many Round Rock garage slabs cracked diagonally during those years. On top of the soil movement, Round Rock summer garage temperatures hit 120 to 130°F by July afternoon, which kills cheap epoxy paint kits with hot-tire lift within a single season. Our system handles both: diamond-ground prep for permanent mechanical bond, structural crack stitching for slabs that moved during droughts, and a polyaspartic topcoat that doesn’t soften in the Texas heat.
What We Typically Find in Round Rock Garages
- 1990s-2000s subdivisions: single-bay or two-bay attached garages with looser slab tolerances; common diagonal drought cracks; vapor barrier sometimes missing under slab
- Teravista and newer master-planned homes (2010s+): three-bay attached garages with tighter pours, proper vapor barriers, and minimal cracking; clean candidates for a one-day polyaspartic install
- Hot-tire lift on existing kits: the most common call — homeowner spent a weekend on a big-box paint kit, the kit lifted in tire-shaped patches by mid-summer, and they want it stripped and replaced with the real system
- I-35 corridor housing near Dell Diamond: mid-1990s starter homes with older slabs, occasional pitting and surface contamination, often need concrete repair plus coating rather than coating alone
Our Process for Round Rock Homes
On-Site Visit
Free 30-minute estimate. We measure the garage, photograph cracks, moisture-test the slab, and bring sample boards.
Written Quote
Itemized estimate emailed within 24 hours. No on-the-spot signing pressure, no “today only” discounts.
Schedule the Install
Same-week or next-week appointments. Summer pour days start at 6:00 a.m. before the garage heats above 90°F.
2-Day Install
Day one: diamond grinding, crack repair, MVE primer if needed. Day two: epoxy base + flake broadcast + polyaspartic topcoat.
Walk-Through and Drive On
Walk on the floor at the end of day two. Drive on it the next morning. Warranty paperwork delivered at walk-through.
Locally Owned, Working in Round Rock for Years
We’re an Austin-based crew — not a franchise dispatched from San Antonio or Dallas. Round Rock is our backyard. The Dell Diamond is a 15-minute drive from our staging area, and we’ve installed in Teravista, Forest Creek, Stone Canyon, and the older neighborhoods around Old Settlers Park enough times to have a feel for which subdivisions tend to have which slab issues. The crew that quotes is the crew that installs — same people, same standards.
Services Available in Round Rock
Garage Floor Epoxy Coating
The default Round Rock job — two-day prep-and-pour with full broadcast flake and polyaspartic topcoat.
Polyaspartic Floor Coating
One-day install for homeowners who can’t lose a working week of garage access.
Metallic Epoxy Floors
Custom marbled metallic for Teravista and newer showroom-style garages.
Concrete Repair + Coating
Crack stitching and resurfacing for drought-damaged 1990s and 2000s Round Rock slabs.
Frequently Asked Questions — Round Rock
How fast can you get to Round Rock?
Same-week appointments are normal. We’re based in central Austin and Round Rock is a 25-minute drive up I-35 — we can usually visit for an estimate within 24 to 48 hours of your call.
Do you work in Teravista specifically?
Yes — Teravista is a clean install scenario because the slabs are newer and built to current vapor-barrier and rebar standards. Many of our Teravista installs are one-day polyaspartic systems because the slab condition is excellent.
My garage cracked during the 2022 drought — can you fix it?
Yes. Drought cracks are our specialty — we stitch them with fiber reinforcement and structural paste, grind flush, and coat over a uniform surface. Pre-drought slab cracks are common in eastern Round Rock subdivisions on Houston Black clay; we see them every week.
I tried a big-box paint kit and it lifted — can it be saved?
The kit can’t be saved — it needs to come off — but the slab usually can. Diamond grinding strips the failed kit in one pass, and the underlying concrete is almost always a great candidate for the real coating system. The lifted kit is actually a sign the slab itself is sound.
Will summer heat affect the install?
July and August installs start at 6:00 a.m. to keep slab temperatures below the 90°F polyaspartic cure cap. We schedule around the forecast and your access window. The summer heat is something we work around, not something that stops the project.
What We Typically See in 78664
Round Rock spans nearly three decades of construction, so 78664 garages range from looser-tolerance 1990s slabs near Dell Diamond and Old Settlers Park to the tight master-planned construction at Teravista, Forest Creek, and Avery Ranch. The most common condition we encounter is mid-life slab maturity: a 15- to 25-year-old garage that’s developed a few cracks from drought-cycle clay movement, mild surface dusting, and possibly some hot-tire residue from an old big-box kit. Those slabs are exactly the prime candidate for our diamond-grind-plus-stitch-plus-coat workflow — the structural integrity is fine, but the surface needs a real coating to lock it down for the next 15 to 20 years. We see less moisture-vapor-emission trouble in Round Rock than we do in older inner-Austin garages because the under-slab vapor barriers were generally installed correctly from the mid-1990s onward.
Nearby Service Areas
Free Round Rock Estimate
Same-week appointments. Written, itemized quotes. No high-pressure sales.